How to Clean Downspouts and Gutters

Proper cleaning and maintenance of your home’s downspouts and gutter system is like maintaining the looks of your home’s exterior great. It may prevent further damage to the interior aspect of your house due to flooding on the walls and foundation or leakages in your roofing because of seepage of water.

Downspouts and gutters should always be cleaned and inspected for any signs of needed repairs at least two occasions per year. The best times to perform this are typically late fall as well as late spring. If you suspect an issue or live in extremely rainy areas, then you should inspect them more often.

The following are some of the steps or procedures to keep the downspouts and gutter system on your home clean and well-maintained:

1. Gather equipment and Pick a Starting Point

Bring your equipment and tools to an area near your starting spot. The corners of your house are good starting points because this is where downspouts are usually situated. It is best to begin close to the downspout and then, work away from it in order to avoid pushing more debris into it.

Set your extension ladder on a flat or level surface. Secure a plastic trash bin to gather all the debris that you will about to collect. This set up decreases clean up later on. Wear work gloves to protect you from sharp objects in your downspouts and gutter system. The work gloves will also keep your hands clean.

2. Get Rid of Huge Debris

Start at the portion of your gutter nearest to the downspout. Use a hand spade or garden trowel to collect debris. Put it inside a plastic trash bag or bucket. If any element resists being scooped up, get rid of them by hand. If you are planning to dispose the debris in a compost pile, you must have a separate trash bag for metal objects like roof nails.

3. Rinse the Gutter System

Once you have eliminated all of the bigger debris, get your garden hose. Rinse your gutters in the direction of your downspout with the use of the spraying attachment on your hose. Spray the gutters until no signs of dirt and debris left.

4. Clear Clogs or Blockages

If your downspout is clogged or blocked, you will have to clear it out. as a matter of fact, there are three options for you. Try each option until you find the option that works well for you. It is probably simplest to start by using a garden hose to guide the water into your downspout from the bottom part. Furthermore, this may force any blockages or clogs loose. In addition to that, you can also use a garden hose to direct the water into your downspout from the upper part. This will cause the clog to knock loose as well.

5. Find and Fix the Damage

Check the downspouts and gutters for any indications of damage. Look for cracks, dents or holes and repair them as soon as possible. It’s also best that you hire a professional gutter repair expert.

Submit a Comment

Your email address will not be published. Required fields are marked *